Balsa Pole Float Bodies |
|
Click Image To Enlarge
"Power Pencil" Shape Quantity of 20 drilled and shaped balsa pole float bodies. These are "Power Pencil" Shape. The central hole is 1.0mm in all sizes. Choose size from menu.
Price £4.95 + £1.75 Post (UK)
Click Image To Enlarge
"Elongated/Offset Diamond" Quantity of 20 drilled and shaped balsa pole float bodies. These are "Elongated/Offset Diamond" Shape. The central hole is 1.0mm in all sizes.
Price £4.75 + £1.75 Post (UK)
Click Image To Enlarge
"Slim Shaped Balsa" Quantity of 20 drilled and shaped balsa bodies as shown. These are similar to "dibbers" in that they are drilled one end only to the appropriate depth to accept a stem. The stem should be around 1 1/3 x body length. They are drilled 0.8mm. Available in 0.3gm only
Price £4.75 + £1.75 Post (UK)
"In Line" Bodies
Click Image To Enlarge
"Rounded Diamond" Shape Quantity of 20 drilled and shaped balsa pole float bodies. These are the In Line version of the "Rounded Diamond" Shape listed above. They are rated 0.5gm. The central hole is 1.0mm. The fitted line tube eliminates the line rubbing / cutting the body.
These are listed as slight seconds as the one half of the body is a little short (probably happened during the parting off operation during manufacture). I estimate about a 32nd to a 16th of an inch. See close up. Will be less noticeable if this end is positioned below the tip. Priced accordingly.
Quantity of 20
These are listed as slight seconds as the one half of the body is a little short (probably happened during the parting off operation during manufacture). I estimate about a 32nd to a 16th of an inch. See close up. Will be less noticeable if this end is positioned below the tip. Priced accordingly.
Quantity of 20
Price £3.60 + £1.75 Post (U.K.)
Click Image To Enlarge
"In Line Diamond Shape" Quantity of 10 drilled and shaped balsa pole float bodies as shown. These are "In Line" Diamond shape and feature a fitted line tube as can be seen. Size 4 x 10 Only.
These are now in multiples of 10
These are now in multiples of 10
Price £2.90 (Qty. 10) + £1.75 Post (UK)
Click Image To Enlarge
In Line "Skittle" Shape. Quantity of 10 drilled and shaped in line balsa pole float bodies as shown. These are "Skittle" shape and are similar to dibbers in that they are drilled, base end only, to the appropriate depth to accept a stem. The hole is 0.8 mm. diameter. These are the
"in line" version and feature a fitted line tube as can be seen. This runs from the tip to the side of the stem (when fitted). A little "dumpier" than the pattern above.
P.S. These are now in multiples of 10
Only Available in size 0.2gm
"in line" version and feature a fitted line tube as can be seen. This runs from the tip to the side of the stem (when fitted). A little "dumpier" than the pattern above.
P.S. These are now in multiples of 10
Only Available in size 0.2gm
Price £2.90 (Qty.10) + £1.75 Post (UK)